• 1.01 System Description
    • A. Contact adhesive bonded membrane over mechanically fastened insulation.
  • 3.03 Installation Instructions
    • A. Install in accordance with International Diamond Systems specification manual.
    • B. Roll EPDM membrane over insulation. Position without stretching. Allow to relax for 30 min. before continuing.
    • C. Fold membrane onto itself, exposing the underside. Apply adhesive to membrane and insulation. Allow adhesive to dry until tacky. Slowly roll membrane onto the substrate. Brush with stiff bristled broom for proper adhesion. Repeat for remaining half.
    • D. Splice overlapping edges.
    • E. Complete flashing details for protrusions and wall.

(to fully adhered)  (to specifications)